Q qtommer Member Feb 20, 2009 #1 hi im currently doing a wireless LED Dot Matrix Display i would like to ask whether a MAX 232 IC from Maxim is compatibly able to convert voltages from my computer to the input of an AVR Microcontroller. Thanks=)
hi im currently doing a wireless LED Dot Matrix Display i would like to ask whether a MAX 232 IC from Maxim is compatibly able to convert voltages from my computer to the input of an AVR Microcontroller. Thanks=)
dknguyen Well-Known Member Most Helpful Member Feb 20, 2009 #2 Yes, it will. Just read the datasheet (with some knowledge about your PC voltage levels).
Papabravo Well-Known Member Most Helpful Member Feb 21, 2009 #3 Maybe not. The original MAX232 chip was a 5V part. If your AVR is running on a lower voltage, like say 3.3V, then you have to find a member of the MAX family that can make RS-232 levels from a 3.3V supply.
Maybe not. The original MAX232 chip was a 5V part. If your AVR is running on a lower voltage, like say 3.3V, then you have to find a member of the MAX family that can make RS-232 levels from a 3.3V supply.