k7michal
New Member
I'm implemanting the MCLR as a reset switch; I have a 910k resistor tied high (5V) and a grounding push button switch.
For the most part things seem to be working okay, but when I copied the same .hex into other 12F675's some of those chips are not working... The program will boot properly but when I reset it, it seems to hang!
I've tried tieing a 0.01uF cap from the pin to ground but that doesn't help?
Just wondering if anyone else ever had similar issues.
Thanks in advance.
For the most part things seem to be working okay, but when I copied the same .hex into other 12F675's some of those chips are not working... The program will boot properly but when I reset it, it seems to hang!
I've tried tieing a 0.01uF cap from the pin to ground but that doesn't help?
Just wondering if anyone else ever had similar issues.
Thanks in advance.