beakie New Member Sep 4, 2010 #1 I have a question about MIDI wiring... Why does this not connect pin 2 of the midi ports... https://www.electro-tech-online.com/custompdfs/2010/09/MIDI_Shield-v13.pdf ...but this does? Arduino - Midi Thanks G
I have a question about MIDI wiring... Why does this not connect pin 2 of the midi ports... https://www.electro-tech-online.com/custompdfs/2010/09/MIDI_Shield-v13.pdf ...but this does? Arduino - Midi Thanks G
beakie New Member Sep 4, 2010 #2 ...also the sparkfun schematic puts a resistor on the tx line... do I need it/why do I need it?
PCBWING New Member Sep 4, 2010 #3 beakie said: I have a question about MIDI wiring... Why does this not connect pin 2 of the midi ports... https://www.electro-tech-online.com/custompdfs/2010/09/MIDI_Shield-v13-1.pdf ...but this does? Arduino - Midi Thanks G Click to expand... You mean GND? Attachments g.gif 10.1 KB · Views: 180
beakie said: I have a question about MIDI wiring... Why does this not connect pin 2 of the midi ports... https://www.electro-tech-online.com/custompdfs/2010/09/MIDI_Shield-v13-1.pdf ...but this does? Arduino - Midi Thanks G Click to expand... You mean GND?
beakie New Member Sep 4, 2010 #4 PCBWING said: You mean GND? Click to expand... No, sorry. I mean pin 2 of the MIDI port itself.
PCBWING New Member Sep 4, 2010 #5 I guess you say this port's 2nd pin? Attachments 2.gif 4.5 KB · Views: 180
beakie New Member Sep 4, 2010 #7 PCBWING said: I guess you say this port's 2nd pin? Click to expand... Yes, does it need to be connected to ground? If not, why does the arduino tutorial suggest it? And why is there a resistor on the TX line in the sparkfun schematic? Last edited: Sep 4, 2010
PCBWING said: I guess you say this port's 2nd pin? Click to expand... Yes, does it need to be connected to ground? If not, why does the arduino tutorial suggest it? And why is there a resistor on the TX line in the sparkfun schematic?
PCBWING New Member Sep 4, 2010 #8 I feel you pointing the OPTO DARL 6N138S 's output, not the arduino's. If connect to arduino directly, those two are the same.
I feel you pointing the OPTO DARL 6N138S 's output, not the arduino's. If connect to arduino directly, those two are the same.