Modbus protocol for industries application

Status
Not open for further replies.
Modbus is an industry standard... If a device has a PLC then it will probably have a Modbus interface.. You can query devices via Modbus and then read / write to specific registers... This way you can control the device even if you only have a basic knowledge of the system....

Canbus is slowly taking over as it has better distance coverage and device properties...

I have tried Modbus and Canbus…. I think Modbus is out of date and too constrictive..
 
What do you think how Gill Sense work, what data we will get on cloud?
 
This device is a graphical "upfront" display... All the utilities it is reading will have to have "Smart" sensors attached to them.. Ie.. one sensor to monitor each utility.. Then they connect to the device then this information is stored on a cloud.. You will be able to access this data via computer and mobile phone etc.. The data will be as described in the article...
 
ejazbeyond said:
if two machines have different company drives then in that case how it works?
Click to expand...
Remember the article describes "compatible devices" so I don't expect any device to work... There will be limitations...
 
Modbus is a standard comms protocol, it can operate on serial or network connections.
However the protocol uses registers and 'coils', the way data is stored depends on how the programmer defined the system.
Not sure how this gizmo you mention is able to deal with this, unless you have to spend a lot of time setting it up.
 
Thread restarted by a spammer, since deleted.
Thread locked.
JimB
 
Status
Not open for further replies.

Similar threads

C
Components for AC-DC rectifier
Replies
13
Views
1K
danadak
  • Question
Modbus basic question what to poll for for the master ?
Replies
3
Views
2K
Tony Stewart
F
  • Question
Y capacitor location for Conducted immunity?...for conducted EMC?
Replies
0
Views
859
Flyback
F
S
  • Question
Where to get foam for ICs?
Replies
10
Views
846
seventhson
S
  • Question
Modbus-TCP to USB/COM Port?
Replies
4
Views
4K
Grossel
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…