bananasiong,
Here is the error I recieve. I have all of the below files in a single project as a .mcp file, but I could not upload a file with this extension.
Make: The target "F:\Senior Design II\Can_Comm.o" is out of date.
Executing: "C:\Program Files\Microchip\MPASM Suite\MPAsmWin.exe" /q /p16F877A "Can_Comm.asm" /l"Can_Comm.lst" /e"Can_Comm.err" /o"Can_Comm.o"
Error[150] F:\SENIOR DESIGN II\CAN_COMM.ASM 6 : Labels must be defined in a code or data section when making an object file
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 7 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 8 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 9 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 10 : Executable code and data must be defined in an appropriate section
Error[150] F:\SENIOR DESIGN II\CAN_COMM.ASM 11 : Labels must be defined in a code or data section when making an object file
Message[302] F:\SENIOR DESIGN II\CAN_COMM.ASM 11 : Register in operand not in bank 0. Ensure that bank bits are correct.
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 11 : Executable code and data must be defined in an appropriate section
Error[151] F:\SENIOR DESIGN II\CAN_COMM.ASM 12 : Operand contains unresolvable labels or is too complex
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 12 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 13 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 14 : Executable code and data must be defined in an appropriate section
Error[150] F:\SENIOR DESIGN II\CAN_COMM.ASM 17 : Labels must be defined in a code or data section when making an object file
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 18 : Executable code and data must be defined in an appropriate section
Error[150] F:\SENIOR DESIGN II\CAN_COMM.ASM 19 : Labels must be defined in a code or data section when making an object file
Message[302] F:\SENIOR DESIGN II\CAN_COMM.ASM 19 : Register in operand not in bank 0. Ensure that bank bits are correct.
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 19 : Executable code and data must be defined in an appropriate section
Error[151] F:\SENIOR DESIGN II\CAN_COMM.ASM 20 : Operand contains unresolvable labels or is too complex
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 20 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 21 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 22 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 23 : Executable code and data must be defined in an appropriate section
Error[150] F:\SENIOR DESIGN II\CAN_COMM.ASM 25 : Labels must be defined in a code or data section when making an object file
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 26 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 27 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 28 : Executable code and data must be defined in an appropriate section
Error[150] F:\SENIOR DESIGN II\CAN_COMM.ASM 29 : Labels must be defined in a code or data section when making an object file
Message[302] F:\SENIOR DESIGN II\CAN_COMM.ASM 29 : Register in operand not in bank 0. Ensure that bank bits are correct.
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 29 : Executable code and data must be defined in an appropriate section
Error[151] F:\SENIOR DESIGN II\CAN_COMM.ASM 30 : Operand contains unresolvable labels or is too complex
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 30 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 31 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 32 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 33 : Executable code and data must be defined in an appropriate section
Error[152] F:\SENIOR DESIGN II\CAN_COMM.ASM 34 : Executable code and data must be defined in an appropriate section
Error[129] F:\SENIOR DESIGN II\CAN_COMM.ASM 35 : Expected (END)
Halting build on first failure as requested.
BUILD FAILED: Thu Oct 18 21:09:16 2007
I have no idea what it is trying to say to me. I aplologize if I seem ignorant when it comes to this, but this is about the second time I have even attempted to write code.