is there anyone who can help me on how to interface an ordinary mp3 cd player with the standard hard disk drive in order to increase its capacity..thanks!
You mean puling the IDE socket out of the CD drive and sticking it a disk drive?
The IDE socket fits on bouth and the interface is ALMOST the same.And an CD drive only has up to 700 MB of storage wile an disk drive can have over 200 GB.So it will probobly wont be abe to handle that much storage.
You can use an Microprocesor to interface it prety easaly but it it realy complicated making it hande a file sistem(FAT16,FAT32,NTFS...)
You cod try to stick it on but it probobly wont work.
is there anyone who can help me on how to interface an ordinary mp3 cd player with the standard hard disk drive in order to increase its capacity..thanks!
But its firmware is NOT designed to handle anything more than 700MB.And it is designed to hande an file sistem caled CDFS and not FAT32 or NTFS (Wich PC harddrives use)
It is probobly easyer to make your own MP3 player insted of modefiing one.
is there anyone who can help me on how to interface an ordinary mp3 >cd< player with the standard hard disk drive in order to increase its capacity..thanks!
in a discman the sound ic is bust and the number is not loking the ic have tatally 10 pins 5 pins right side and pins left sideso please tell me the ic number
I fixed (two were in the garbage at a stereo store) a Creative Nomad MP3 player that uses an 8GB hard drive from a laptop. It is about 3 years old. It plays for about 2 hours with four 2500mA/hr Ni-MH cells then they need charging.
A new ipod has an 8GB hard drive that is tiny. It plays all day and half the night from its tiny battery before it needs charging.