Well I cant actually tell if it works or not as mplab 80 cant open the series port (im using a USB to serial adaptor)
EDIT:
error messages:
ICDWarn0027: The selected baud rate is not supported by your system. Chances are it will work anyway, but if persistent communications occur, consider switching to a lower baud rate.
ICD0019: Communications: Failed to open port: (Windows::GetLastError() = 0x2, 'Systemet finner ikke angitt fil.
')
ICD0021: Unable to connect with MPLAB ICD 2
MPLAB ICD 2 Ready