Need datasheet

danadak

Well-Known Member

Most Helpful Member

• Mar 1, 2023

• #2

Post well focused picture of topside of part....

 

Upvote 0 Downvote

G

gkuyoni

New Member

• Mar 1, 2023

• #3

I will

 

Upvote 0 Downvote

G

gkuyoni

New Member

• Mar 2, 2023

• #4

Here is the ic..at the left is the company's logo, right side top are the letters: SD16932 , bottom right AT-AH5ERJ

 

Attachments

• IMG_20230302_111450.jpg

  2.4 MB · Views: 317
• IMG_20230302_111420.jpg

  2.2 MB · Views: 278
• IMG_20230302_111337.jpg

  2 MB · Views: 257
• IMG_20230302_111222.jpg

  1.9 MB · Views: 319

Upvote 0 Downvote

G

gkuyoni

New Member

• Mar 2, 2023

• #5

I have googled the ic to no avail.

 

Upvote 0 Downvote

rjenkinsgb

Well-Known Member

Most Helpful Member

• Mar 2, 2023

• #6

Can you try to get a better photo? None of those are sharp enough to see any detail of the markings or logo..

 

Upvote 0 Downvote

rjenkinsgb

Well-Known Member

Most Helpful Member

• Mar 2, 2023

• #7

It could be another manufacturers equivalent of the GN6932 / TA6932 LED display driver? The input signals look to be in roughly the correct area of the IC.

The datasheets are Chinese, but they give the pinout etc:

https://datasheet.lcsc.com/lcsc/2009241905_GN-Semic-GN6932_C265476.pdf

https://datasheet.lcsc.com/lcsc/2201171430_TM-Shenzhen-Titan-Micro-Elec-TA6932_C2962676.pdf

 

Upvote 0 Downvote

G

gkuyoni

New Member

• Mar 5, 2023

• #8

Well,it's a led display driver IC for the ACS-40 digital weighing scale.any help will be appreciated.

 

Upvote 0 Downvote

rjenkinsgb

Well-Known Member

Most Helpful Member

• Mar 5, 2023

• #9

The 6932 LED driver is made by numerous different companies, which each give it a different prefix I've found four different ones within a few seconds of searching.

Have you compared the pinout of your IC to the ones in the data I linked to?
You have not posted a clear photo, so no one else can do that.

 

Upvote 0 Downvote

Tony Stewart

Well-Known Member

Most Helpful Member

• Mar 6, 2023

• #10

The photos look like a cartoon on Fuzzy Logic. If you do not have a macro focus, move back and increase lighting then crop.

 

Upvote 0 Downvote

G

gkuyoni

New Member

• Mar 6, 2023

• #11

I will do that,thanks

 

Upvote 0 Downvote

atferrari

Well-Known Member

Most Helpful Member

• Mar 7, 2023

• #12

Make your picture in daylight. No flash.
Avoid the sun shining directly on the board.

Mobile phones can get marvels.

 

Upvote 0 Downvote

Tony Stewart

Well-Known Member

Most Helpful Member

• Mar 7, 2023

• #13

GN6932 Price & Stock | DigiPart

GN6932 Price, GN6932 Stock, Buy GN6932 from electronic components distributors. Instant result for GN6932

www.digipart.com

5pcs $0.22 /pc almost free

 

Upvote 0 Downvote