Need help identifying this part.

T

tronitech

Active Member

• Saturday at 1:14 PM

• #2

Post deleted.

 

Last edited: Sunday at 7:38 AM

Upvote 0 Downvote

ZipZapOuch

Well-Known Member

Most Helpful Member

• Saturday at 9:01 PM

• #3

tronitech said:

It's a spade connector. One of these should do?

Click to expand...

Which one, specifically? I don't see ANY that meet the specification. Do you? If you don't, please delete your post.

 

Upvote 0 Downvote

ZipZapOuch

Well-Known Member

Most Helpful Member

• Saturday at 9:09 PM

• #4

The white housing looks like a custom job, maybe 3D printed.

Please report the width and thickness of the flat spade (male) that the connector in your photo connects to. If it is 4mm x 2mm, you have a highly unusual connector. Most are no more than 0.6mm thick.

 

Upvote 0 Downvote

A

augustinetez

Well-Known Member

Most Helpful Member

• Sunday at 1:32 AM

• #5

If you are talking about a replacement for the metal part on the black wire https://www.amazon.com/Baomain-Female-Terminals-Connector-Insulated/dp/B09R4BWRT8

Female Spade Quick Splice Crimp Terminals 2.8mm Silver Crimp Connector

 

Upvote 0 Downvote

rjenkinsgb

Well-Known Member

Most Helpful Member

• Sunday at 2:53 AM

• #6

Every different connector manufacturer has their own insert dimensions and latching details; unless the insert is for that exact type of connector shell, it's unlikely to fit in the proper location in the shell and work correctly.

What does it connect to?
(Photo & makers details + part numbers if possible).

 

Upvote 0 Downvote

N

NBD925

Member

• Yesterday at 8:34 PM

• #7

The Male Tab dimensions: 3mm wide x 7mm Long

Female portion:
4mm Wide 15mm Long 2mm thick

The white connector is from a KTM motorcycle. This connector goes in the gas tank and hooks the fuel pump Positive and Negative as well as a low fuel light. This connector make connection to three flat male tabs that then go through a molded connector in the tank to the outside of the tank.

This looks close, I think????

 

Last edited: Yesterday at 8:40 PM

Upvote 0 Downvote

rjenkinsgb

Well-Known Member

Most Helpful Member

• Yesterday at 10:19 PM

• #8

Have a look down this page:

Motorcycle 2.8mm - 110 Connector and Terminals

Sumitomo MTW (Common Electrical Connector found on Honda, Triumph, and Ducati Motorcycles) and Hitachi Type Locking and Non-locking connectors. Comes complete with connector shell and terminals. Additional .110 - 2.8mm terminals are available at the bottom of each listing.These Connectors are...

www.cycleterminal.com

 

Upvote 0 Downvote

N

NBD925

Member

• Today at 5:33 AM

• #9

I saw that but got hung up on the measurements of the terminals. What is the nomenclature I should be looking for? Size and what not. This site seems a little confusing compared to the measurements I got.

Motorcycle Spade Terminals

Motorcycle Male and Female Spade terminals for .312, .250, .187, .110, .090 Connectors. AMP Fastin Faston, Yazaki, JST, Molex. Great prices, and Cheap Shipping.

www.cycleterminal.com

 

Upvote 0 Downvote

rjenkinsgb

Well-Known Member

Most Helpful Member

• Today at 12:12 PM

• #10

The FST1820 type, next to the bottom, seems the most likely one?

 

Upvote 0 Downvote