Mason Dixon
New Member
I'm planning on powering the potters wheel with a 3/4hp Frigidaire washer motor. I see on it that it can do 1750, 1150, and 850rpm. Can I wire up a switch that will allow me to change between the three speeds?
Also, the output shaft diameter on my motor is 7/16" and the input on the 40:1 gear reducer is 1/2", how can I hook these up?
Also, the output shaft diameter on my motor is 7/16" and the input on the 40:1 gear reducer is 1/2", how can I hook these up?