guys i have some concerning confessions to make XD..i didnt want to sit around and wait for all the china-components, so meanwhile i built the fancontrol out of my PC, i didnt really need it anyway. I hooked the power input of the Fancontroller to the 12V 1,5A wallwart...i also connected one fan..i was just realizing that the fan does not blow as it made "PUFF" and some smoke appeared. SO maybe i should have asked first, but i was under the impression i did everything right. The fans are 12V, so i thought 12V it is. Interesting is, in the PC the fancontrol was connected via Molex/sata connector. Im not sure but i think thats only 5V. As far as i know, only the GPU is connected on the 12V Rail. But how does that work if theres "12V" on the fan? Or was it too much current? I was thinking that the 1,5A on the wallwart is only the max rating and that the connected device creates the current....hmpff
id really like to know what happened there. cant see any obvious damage, but i was very obvious the fabcontrol wasnt happy.