Need help with TTL clock dividing / copying etc..

Hi all. Need a little help. Have a ttl clock that i need to provide to several different devices. For simple numbers lets just say the clock will be running at 100hz. What would be the best way to use this clock to provide 3 clocks running at the same frequency or divided frequencies? Any advice would be greatly appreciated. Thanks so much.

Use a clock management chip. There are a variety of architectures for different applications.

What about something like this?
https://www.electro-tech-online.com/custompdfs/2011/02/AD9513.pdf

Since the fan-out from most TTL outputs is 10 other TTL inputs, what is the problem?

Cause clocks are special. Besides, he mentioned a desire for divided frequencies.

PS OH wait. He said 100Hz. I thought it was 100Mhz. Nevermind them..