Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
i'm using a toner transfer in one sided pcb. but how do this layout in the circuit on the top of pcb?
just for the user to know exactly where he/she gonna put the components. tnx
"toner transfer" .. After you etch the board, toner transfer on the other side, clean it up so it looks nice, clear coat it. It might just work for ya.
I don't do through hole, but I've done the toner transfer 'silk screen' a few times. The 'full release' fab-in-a-box style toner transfer papers work well for this. I've never needed to seal over top, but these are usually just protoboards and don't get any rough handling.
You can also put text in your etched PCB so you can label components on the bottom.
i'm using toner transfer laser printed paper(photo paper). is it the same when you, transfer the printed circuit to the copper that it will leave an excess paper around the trace?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.