Only one simple question - Please...Please?

Status
Not open for further replies.
D

devonsc

New Member
Would like to ask regarding the following Schottky diode's datasheet.

Just to reconfirm. Does it mean that the voltage needed for me to forward bias this specific diode is approximately 0.5V if I'm referring to BAT48 and I'm having a flow of 80mA?

Please? Comments needed

Thanks in advance...
 

Attachments

  • schottky_diode2.jpg
    100.3 KB · Views: 735
  • schottky_diode1.jpg
    93.4 KB · Views: 726
devonsc the heading of the second column says "Test conditions" so at a temperature of 25 degC and a current of 50mA Vf will have a maximum value of 0.5V for the BAT48 schottky diode.

i hope that helps
 
Thanks Thanks....At first I thought I read something wrongly as I'm not sure, so its approximately 0.5V?

Thanks again. Post End
 
Status
Not open for further replies.

Similar threads

Typical TV backlight LEDs data please ?
Replies
6
Views
5K
Nigel Goodwin
V
Can you please help with this component?
Replies
10
Views
7K
rjenkinsgb
N
Hall effect current sensor - from Allen Bradley Powerflex 755 - please help to identify
Replies
2
Views
6K
niroby
N
M
Can any one help me to replace resistor (read detail of this thead) (AEOLUS 936 Soldering Station)
Replies
9
Views
6K
medgard789
M
S
Any one seen or used these?
Replies
11
Views
5K
shortbus=
S
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…