Hi,
I want to make my circuit on PCB, I have designed the schematic and simulated it on OrCAD e.t.c. Now, is there any PCB layout software in which I just make my schematic and it can convert my schematic in a corresponding professional looking PCB layout ?
I tried ExpressPCB but there I have to place the components on the pcb my self and then route them...... I want automatic place and route corresponding to my inputted schematic.
I use Livewire to draw up schematics and simulate them and I find it useful. From Livewire if you also purchase PCB. wizard you can transform to PCB automatically it will generate all you need.
I'm sure that this is not for the skilled but it's useful to start.
Here's a clip- **broken link removed**
A better route would be to persevere with what you first tried.
Hi,
I want to make my circuit on PCB, I have designed the schematic and simulated it on OrCAD e.t.c. Now, is there any PCB layout software in which I just make my schematic and it can convert my schematic in a corresponding professional looking PCB layout ?
I tried ExpressPCB but there I have to place the components on the pcb my self and then route them...... I want automatic place and route corresponding to my inputted schematic.
DIPTRACE is the best software for the Auto Routing.You have to just draw a schematic and then run auto routing it will done automatically into PCB,
You can download from Downloads :: DipTrace
post your circuit schematic and maybe someone here can help.
I myself use express PCB. It works for me.
although I have been trying to print out a board design and keep getting the print too small
yet I print out an older board design of same and comes out right. Have yet to figure out why??
thats what I was thinking. one wrong connection and the magic smoke Gods will appear.
use a pcboard design software. Save the pencils for drawing cartoons
For the assurance of All your pin connections are right.
All your connections have been made, and, right.
There are no missing connections.
There are no wrong connections.