PIC 16F873 microcontroller

N

nevinbabu

New Member

• May 4, 2007

• #1

Hello everyone!!!
I wanted to use PIC 16F873 in my project.
Could anyone suggest me a burning circuit and the programmer
for burning hex files into the PIC? I do not intend to buy any kit and
want to develop the burning circuit myself.Please help.

 

O

Odin

Member

• May 4, 2007

• #2

Have a look at **broken link removed**

 

N

nevinbabu

New Member

• May 14, 2007

• #3

using parallel port

Odin said:

Have a look at **broken link removed**

Click to expand...

Are there any burning circuits using parallel port for PIC16F873?

 

Nigel Goodwin

Super Moderator

Most Helpful Member

• May 14, 2007

• #4

Why not read the 'sticky' at the top of this forum?.

 

gramo

New Member

• May 14, 2007

• #5

I'd really recommend the PICKit 2. It's cheap, made by the people that make PIC's, and it comes assembled.

**broken link removed**

$34.95 From Microchip, and $12 shipping to anywhere in the world

Included in this package is the PICkit 2 Programming Software, an A to mini-B USB cable, lessons for programming PICmicro MCUs etc

 

A

amindzo

Member

• May 16, 2007

• #6

Hi,
you can use these programmers:
https://www.electro-tech-online.com/custompdfs/2007/05/pic-pg1a.pdf

https://www.electro-tech-online.com/custompdfs/2007/05/pic-pg2cPDF.pdf

they works very well and you can use ICprog 1.05 to write the hex file to microcontroller.

 

Last edited: May 16, 2007

ArtemisGoldfish

Member

• May 17, 2007

• #7

Just because everyone is throwing around their suggestions, I'll give my two cents: I got the $12 serial PIC programmer from SparkFun. You might also want to pick up a 3-pin oscillator from their site if the PIC you plan on using only supports external oscillation.

 

Sceadwian

Banned

• May 17, 2007

• #8

Beginners should start at least with a chip that has enough features to have an onboard oscilator...