Surge
New Member
Hello ,
**broken link removed** , If we use a I2CREAD or I2CWRITE
for some external eeprom the Write address and the Read Address is the same all the time . Whereas if we take for example 24C08A and wire it as follows 1,0,1,0,A2,A1,A0,R/W. where A2= 0 ,A1=0 ,A0=1 . Then we get read and write address as follows
Write @ A2 .
Read @ A3 .
In this case do we require I2CWRITE DPIN,CPIN,$A2,B0,[B0] for writing to EEPROM and
I2CREAD DPIN,CPIN,$A3,B0,[B1,B2] for writing to EEPROM .
Need help urgent !
Thanks
Surge
**broken link removed** , If we use a I2CREAD or I2CWRITE
for some external eeprom the Write address and the Read Address is the same all the time . Whereas if we take for example 24C08A and wire it as follows 1,0,1,0,A2,A1,A0,R/W. where A2= 0 ,A1=0 ,A0=1 . Then we get read and write address as follows
Write @ A2 .
Read @ A3 .
In this case do we require I2CWRITE DPIN,CPIN,$A2,B0,[B0] for writing to EEPROM and
I2CREAD DPIN,CPIN,$A3,B0,[B1,B2] for writing to EEPROM .
Need help urgent !
Thanks
Surge