PIC Sensitive to touch

Hi guys,

Maybe a silly question here, but I have a 18F4550 wired up, and programmed, only thing is that when i touch it at the top side, it seems to freeze, and when i let go, it just continues. Any ideas how to counter that? Seems that it takes electrical interference. How can i counter that?

I think you have a bad solder joint or a floating input.
It could be many things. A not connected reset!

ronsimpson said:

I think you have a bad solder joint or a floating input.
It could be many things. A not connected reset!

Click to expand...

Ur right... A not connected reset was the problem :/ somehow missed it :/ thnx!