No, I dont' work on electronic circuit building. I've just buy the whole kit to build my robot. I don't care about anything else
. Sometimes I have to build, but only driver for sensors or motors.
The fact that as I buy chinese toys and use there rf control, I found it good.
May you send meeh the pcb board of the transmitter?
my mail:
doanhiep@pfiev99.net
Well, to test a transmitter, I usually use a radio, and try to listen to the signal sent.
You know, it's difficult to build rf transceiver with schemes only. Because the positions and wires between them can makes noises. With thin lines, it can do as a L, and L with C make unexpected frequencies. Therefore, I usually buy the whole kit
<< poor meeh.
As asking for a rf transceiver, you should ask also for the pcb.