chamilackjm
New Member
hey,, i created the schematic a one circuit,.... i tried design board that schematic... but its not good... i uploaded schematic.. anyone can help take create the pcb????View attachment telephone.sch
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Please don't double post.
Hi chamil,
I don't understand what you need the high number of of wire jumps for.
The board can be routed purely single sided without any wire jump!
Here's a raw design.
You might refine it and get it smaller. There are still lots of options to improve it.
Boncuk
Boncuk,
Nice board design, but one thing that i dont understand is why do you design a board with such fine tracks and pads.
It is really a nightmare if it is intended to be a home etched board.
I once designed this way too and found it a pain in the arse to work with, then one day realized why remove all that copper.
I now leave as much copper on the board as i can with as fat tracks and pads as possiable and would much rather a wire jumper than a track between pads.
By leaving more copper on the board your etchant lasts 10x longer and the boards etch much faster and exposure or etching problems are almost non exsistant.
It is one of the problems i found with eagle was it has trouble routing the tracks with large chunky size.
Just some food for thought.
Pete.
hey thanx friend... what do u mean this " I'm not a complete idiot. Some parts are still missing. "