Hi,
i have a problem regarding the fuse setting for avr in ponyprog2000. The datasheet for mega8 say 0(programmed) and 1(unprogrammed).
Now in ponyprog2000 i dont know whether the boxes for each fuse if checked means 1 or 0.
In attempt to program mega8 for some projects i just managed to lock 4 chips already by setting the wrong fuses.
So to rescue these locked chips i am going to build this device**broken link removed**
The latest firmware is 2.04 where the author say to set the internal oscilator to 1Mhz which is factory setting for new mega8.He also said to turn the eesave fusebit.
I am going to use a new mega8 for this device, so before i may destroy my last chip i humbly request the complete fuse setting for this device.Thanks a lot.