I need to replace several caps on a power board for a LCD monitor. The list of caps I need are as follows:
220uf 25v
1000uf 25v
1000uf 10v
2200uf 10v
330uf 25v
I can only access a few of these right now but some are close. Example, I can get a 220uf but its 35V instead of 25v. Same with the 1000uf. I can get 35 v ones but not 25 and 10v. Would I be able to replace them with the higher 35v ones?
I also can't get the 330 right now, would a 470uf 35v work?
These are all electrolytic caps but I only have an axial-lead one in 2200uf. Ok to use?
As always thank you!!!!