C cxxlitos New Member Nov 28, 2024 #1 I found this schematic of a 2 way street and im trying to figure out how to transfer this into my actual breadboard. I also want to know if theres a way that I can get the overall equation of the circuit from this. Please any help would be amazing. Attachments Screenshot 2024-11-28 155337.png 27.3 KB · Views: 117
I found this schematic of a 2 way street and im trying to figure out how to transfer this into my actual breadboard. I also want to know if theres a way that I can get the overall equation of the circuit from this. Please any help would be amazing.
danadak Well-Known Member Most Helpful Member Nov 28, 2024 #2 https://circuitverse.org/ to simulate it. Upvote 0 Downvote
ZipZapOuch Well-Known Member Most Helpful Member Nov 28, 2024 #3 You can't leave pins unconnected. Is the reset seeing 5v or 0V. Is it in reset mode or working mode? Which logic state is it. Same question for "set" pin. It needs to be at 5 or 0V. Upvote 0 Downvote
You can't leave pins unconnected. Is the reset seeing 5v or 0V. Is it in reset mode or working mode? Which logic state is it. Same question for "set" pin. It needs to be at 5 or 0V.