problem whit MPLAB

[jbm]

I try to erase a PIC 16F873A and allways dispaly the following message:

PICSTART Program\Verify Report
02-May-2006, 19:31:35

Device Type: PIC16F84A
Address Range 0-3ff


Program Memory Errors

Address Good Bad

0000: 1683 0000
0001: 30F0 0000
0002: 0085 0000
0003: 1283 0000
0004: 3003 0000
0005: 0085 0000
0006: 2806 0000
0007: 3FFF 0000
0008: 3FFF 0000
0009: 3FFF 0000
000A: 3FFF 0000
000B: 3FFF 0000
000C: 3FFF 0000
000D: 3FFF 0000
000E: 3FFF 0000
000F: 3FFF 0000
0010: 3FFF 0000
0011: 3FFF 0000
0012: 3FFF 0000
0013: 3FFF 0000
0014: 3FFF 0000
0015: 3FFF 0000
0016: 3FFF 0000
0017: 3FFF 0000
0018: 3FFF 0000
0019: 3FFF 0000
001A: 3FFF 0000
001B: 3FFF 0000
001C: 3FFF 0000
001D: 3FFF 0000
001E: 3FFF 0000
001F: 3FFF 0000
Any additional errors are not displayed.


Configuration Bits Errors

Configuration Setting Expected Received

Oscillator RC LP
Watchdog Timer On Off
Power Up Timer Off On
Code Protect Off On


ID Errors

Address Good Bad

0000: 3FFF 0000
0001: 3FFF 0000
0002: 3FFF 0000
0003: 3FFF 0000

 

[bananasiong]

Obviously the chip is selected wrongly

 

[blueroomelectronics]

And the date is 2006

 

[jbm]

no, no my device is a PIC 16f873, I copy the message from Internet, but the message is the same that I look on my MPLAB whit the 16f873, I need a help whit this problem...

 

[mister_e]

Maybe your PIC is a 16F873, but the error log says

PICSTART Program\Verify Report
02-May-2006, 19:31:35

Device Type: PIC16F84A
Address Range 0-3ff

Obviously, you haven't selected the right PIC in MPLAB before programming it.