Hello everyone, I have problem with SG2525, I have made converter with this chip 12V= / 220V~ (200W), shema is in attachment.The problem is that I can not stabilize voltage on 230V but only on 270V (it is to high!).
Can someone help me,
thank you in advance,
Hello everyone, I have problem with SG2525, I have made converter with this chip 12V= / 220V~ (200W), shema is in attachment.The problem is that I can not stabilize voltage on 230V but only on 270V (it is to high!).
Can someone help me,
thank you in advance,
Where did you get the schematic? Could there be a connection missing between pin 2 and the junction of R6 and C13? It looks like the reference (pin 16) somehow needs to get back to one input of the error amp (pins 1 and 2).
It also concerns me that you only have two nodes connected to GND. Is the rail labeled "-" supposed to be GND?
I am not familiar with SG2525. It would take me way too much time to design your circuit, and it probably wouldn't work without breadboard testing and redesign.
I just looked at the datasheet and your schematic, and three questions came to mind. You answered none of them. What's up with that? :?: :?: :?: