Got a question about programming the pic18f87j11 microcontroller with a pickit2 programmer.
looking for the pin layout of the pickit 2 header i'll found this page:
https://www.electro-tech-online.com/custompdfs/2008/03/51292P.pdf
so i need 5 pins: Vdd, MCLR, Vss, DAT and CLK.
Vdd, MCLR and Vss is no problem. But i can't find the DAT and CLK pin on the mircocontroller. I looked several times to the pin diagram of the microcontroller and the page above, but i can;t find the way this must be connected.
thanks for your help...![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
looking for the pin layout of the pickit 2 header i'll found this page:
https://www.electro-tech-online.com/custompdfs/2008/03/51292P.pdf
so i need 5 pins: Vdd, MCLR, Vss, DAT and CLK.
Vdd, MCLR and Vss is no problem. But i can't find the DAT and CLK pin on the mircocontroller. I looked several times to the pin diagram of the microcontroller and the page above, but i can;t find the way this must be connected.
thanks for your help...