M mrel Member Dec 12, 2015 #1 Hello Did voltage reading on sonicview 8000hd the power supply got reading of 30 volt should be 22 volt on pin 3 and 4 both pin read 30 volts which is 8 volt more than should be,is that bad or good? mrel
Hello Did voltage reading on sonicview 8000hd the power supply got reading of 30 volt should be 22 volt on pin 3 and 4 both pin read 30 volts which is 8 volt more than should be,is that bad or good? mrel
Tony Stewart Well-Known Member Most Helpful Member Dec 16, 2015 #2 your manual can verify the test conditions
M mrel Member Dec 16, 2015 #3 Tony Stewart said: your manual can verify the test conditions Click to expand... Tony Stewart Don't have manual ,got voltage from printed circuit where pins are, each pins had voltage mark for that pin. mrel
Tony Stewart said: your manual can verify the test conditions Click to expand... Tony Stewart Don't have manual ,got voltage from printed circuit where pins are, each pins had voltage mark for that pin. mrel