Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

RA5 as an Input pin PIC 16F628A

Status
Not open for further replies.
S

Suraj143

Active Member
Hi all!
I’m using PIC 16F628A.

I have configured my RA5 as an input pin. I used a 4.7k pull up resistor & a switch for that.

Now do I have to turn on the MCLR in the fuse settings? Or can I ignore that?

Thanks
 
Now do I have to turn on the MCLR in the fuse settings? Or can I ignore that?
Click to expand...
No, you'd turn it off with _MCLRE_OFF in the fuse settings.
 
Status
Not open for further replies.

Similar threads

MrDEB
  • Question
pic port expander
2
Replies
28
Views
5K
Pommie
P
A
  • Question
Timing conundrum - PIC Assembly
Replies
9
Views
2K
augustinetez
A
Nigel Goodwin
  • Question
28 pin PIC development board.
Replies
13
Views
5K
Ian Rogers
Ian Rogers
E
  • Question
High res cap meter with PIC 16F628
Replies
7
Views
2K
Elekktrishun
E
W
  • Question
ESP32 30pin vs 38 pin boards
Replies
0
Views
5K
Wp100
W

Latest threads

New Articles From Microcontroller Tips

Back
Top