**broken link removed**
Setting the frequency is easy.
Setting the p-p output seems to be tougher.
There is references to set 200 to 220 V p-p.
2K between pin 9 and 12 (sine ref) gives 200 V p-p
1.2K give 220 V p-p
I'm looking for 24 VAC or about +-34 V or 70 V p-p and less.
The output equations look wierd because of the usual way of operating the generator riding on a -48 VDC bus.
Any ideas.
KISS
Setting the frequency is easy.
Setting the p-p output seems to be tougher.
There is references to set 200 to 220 V p-p.
2K between pin 9 and 12 (sine ref) gives 200 V p-p
1.2K give 220 V p-p
I'm looking for 24 VAC or about +-34 V or 70 V p-p and less.
The output equations look wierd because of the usual way of operating the generator riding on a -48 VDC bus.
Any ideas.
KISS