Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
i am using virtex 5 FPGA.
i am facing a problem regarding serial data communication.
first i have to send serial data from PC to FPGA then i have to send serial data from FPGA to PC.
please help me.
Take a look at THIS POST. Try to ignore all the blather that follows my post. This design works well for transmitting from the computer's RS232 port to the FPGA on a prototype board, and uses the same method of nearly all synthesizable UART cores. Keep in mind that there is a voltage translator chip on the board that sources 0-5V. If you don't have then, then you will need to add one to your FPGA.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.