AtomSoft
Well-Known Member
Hey i have this board a friend gave me from some video monitoring system like a camera switch board. It has tons of ICs some other things as well.
Most if not all ICs are surface mount.
My main question is what would be the best way to get all these ICs off the board and into my hand
I want to recycle basically (reuse) the parts (ics) and other things. I was wondering if anyone had tips to remove these with ease or at least the minimal amount of damage.
Some parts to name:
10 74HC4051
23 Omron Switches with Caps
5 BT829AKPF - VideoStream DECODER
2 BT866KPF - Video Encoder
EDIT:
a few of each: IDT7202,IDT7203,IDT7204 Which are AsyncFIFO.
28.63MHZ OSC
54 MHZ OSC
IDT71256 32K x 8 Static RAM
And many other things
Most if not all ICs are surface mount.
My main question is what would be the best way to get all these ICs off the board and into my hand
I want to recycle basically (reuse) the parts (ics) and other things. I was wondering if anyone had tips to remove these with ease or at least the minimal amount of damage.
Some parts to name:
10 74HC4051
23 Omron Switches with Caps
5 BT829AKPF - VideoStream DECODER
2 BT866KPF - Video Encoder
EDIT:
a few of each: IDT7202,IDT7203,IDT7204 Which are AsyncFIFO.
28.63MHZ OSC
54 MHZ OSC
IDT71256 32K x 8 Static RAM
And many other things
Last edited: