Thank you for all your assistance I have certainly learnt alot with all the advice. I found a small bridge that was not letting the output of pin 14 go high or low. Once removed the circuit worked exactly as explained. The outputs were inverted makng a truth table tricky, however I will put the transistors in for switchng now.
Putting the capacitors onto the base of the transistors will this allow the colours to fade into each other.
I have also put the tri colour LED into the circuit Blue and Green Very dominant. If I was to put larger resistors in for the Blue and Green would this bring all the colours to similar intensity.
Again THANK YOU for all the help