Robotic hand Programming

Status
Not open for further replies.
Thanks alot gordz this might help out alot but the problem is his progra is in hex form and impossible to tweak it cause he hasnt given the c program to it so i some 1 could help me out how to convert the following file and also he has used a PIC12C508A is it possible tht some 1 could help me program a 89S52 with this
 

Attachments

  • rcst_hex.zip
    3.6 KB · Views: 327
divit said:
The thing is i dont need sympathy need your help and i trying my best to get this project done
Click to expand...
I beg to differ. You asked us to feel sympathy and help you do your project at the last minute. As I said you're probably not going to succeed regardless of what any of us manage to do for you. There just isn't enough time.
 
Sorry divit but I can't help much more. I do .asm not C and I only use PIC micros these days. Try Google.
 
Papabravo said:
I beg to differ. You asked us to feel sympathy and help you do your project at the last minute. As I said you're probably not going to succeed regardless of what any of us manage to do for you. There just isn't enough time.
Click to expand...

I doubt tht i am asking at the last minute cause i was told to make this project 10 days back
 
Last edited:
The thing is not in one post i have mentioned that i hav desgned this project i have already asked the owner of this project tht if i can make it or not .So u cant but in it
 
Last edited:
What did you design? Your design appears to be indentical to the one in the link I posted earlier. Post something you've actually done. Your (his) schematic was from 2003
 
I did mention that i am doing the same thing but i also mentioned tht i will be tweaking it in the hardware and adding different sensors liek pressure and temperature for example and extending the project to the whole arm instead of the hand and liek i hav mentioned i need help with the program for driving the servo motors rest i will manage on my own
 
And once the prject is complete and working ill be posting the whole thing with detailed information and will also include the names of the people who helped me through it and gordz will be the first one mentioned
 
This just gets better and better, I could hang it on the wall in my office next to my picture of a llama riding a unicyle.
 
Blue i dont know why u just hate me is that it. By the way i dint even try to find a programmer cause i started learning programming micro controllers in C on my own and i am pretty much dont with the program so any ways thanks for the help
 
I don't hate you divit. I was pointing out that paying someone to do your school assignment is wrong (it can get you expelled in some schools) also your $18 offeris laughable.

Did you ever finish your robot arm?
 
any ways i still have 2 months more till my deadline and i am working on it
and also instead of pulling the fingers with wire drawing motors i am directly fixing the motors inside the hand it self if u still interested in helping me with the program i will post my complete program in a week .
i am gonna wrte in asm as well as C which ever works.
 
Last edited:
Status
Not open for further replies.

Similar threads

M
  • Question
AR4 Robotic Arm
Replies
1
Views
12K
rjenkinsgb
K
PLC programming
Replies
10
Views
4K
Ian Rogers
  • Locked
Commercial robot developers to survey the state of technology at Robotics Summit & Expo 2019
Replies
0
Views
7K
dmiyares
D
ROBOTIC Software and tutorials
Replies
6
Views
3K
rhaeg
D
HELP! Teacher in need of some programming advice for Parallax BOE-Bots!
Replies
1
Views
3K
Dr_Doggy
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…