Searching for C167CR_2 from DIGI / Forth systeme (FS) / Keil

Well according to the date on the AMD chip it's 25 years old - would any of the development software even run on a modern PC?.

Dont need any development SW tool, I already have everything up and running in an old machine, but need a spare if this old chip will brake down in future.

IIRC the C167 was a Siemens(Infineon) 16-bit processor. Good luck finding one. They were probably all allocated to their German customers. That is why we black listed them and never looked back, since the reneged on their commitments.

ETA: The tools do run on a PC

I have new processors and all the components to make a spare board are sourced. I have tried to make a spare of the board, but somenthing is not working as it should.

So therefore im searcing for more information, or an used spare board i can have for experiment purposes.

I have the data sheet for the C167CR_2 board but not the original drawings for PCB.

So all details around this board are needed. but it seems to be hard to find anything

If there is one available, it is most likely to be from someone in Germany. They burned a lot of bridges in the US.