Shottky Barrier Rectifer !

Status
Not open for further replies.

spike47

Member
Hi
I am wanting to replace a couple of "SR2A0 Schottky Barrier Rectifier 2A" finding it difficult to find ! , is there a different one that will match this ?
cheers
Spike
 

Attachments

  • SR220-SR2A0.pdf
    408.7 KB · Views: 139
Thanks Guy's for your help, I have found one to check out, seems to be very similar, could you kind Guy's have a look at it to see if it would do for me .

Attaching; Original Diode SR2A0 .
Attaching : SB3100 ( Told same spec as a SB2100 except 3A not 2A!)

Cheers
Spike
 

Attachments

  • SR2A0. DGD.pdf
    146.6 KB · Views: 123
  • SB3100.pdf
    162.4 KB · Views: 127
Thanks Guy's for your help, I have found one to check out, seems to be very similar, could you kind Guy's have a look at it to see if it would do for me .

Attaching; Original Diode SR2A0 .
Attaching : SB3100 ( Told same spec as a SB2100 except 3A not 2A!)

Cheers
Spike
 

Attachments

  • SR2A0. DGD.pdf
    146.6 KB · Views: 137
  • SB3100.pdf
    162.4 KB · Views: 137

Electrically the spec's are good, but the 3 Amp part is physically larger than your original, in both the body size and the lead diameter.

If there is room for the larger part in your repair, then it would be OK. But check the size of the space before committing to it.
 
Status
Not open for further replies.

Similar threads

Isolation barrier in digital signal isolator.
Replies
5
Views
2K
unclejed613
Z
Not using high voltage rated Y capacitors across the isolation barrier of an SMPS DCDC module?
Replies
2
Views
2K
zenerbjt
Z
T
HELP PLEASE! barrier/door control panel trouble
Replies
14
Views
2K
tufdog71
T
E
up down motorised barrier control???
Replies
7
Views
1K
Triode
V
Barrier control
Replies
0
Views
1K
Virgil2008
V
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…