Hi I was trying to create a current measurement circuitry. For testing purposes I used a 1ohm resistor in series with a 1k resistor with a source voltage of 15V. Therefore the current flowing through the circuit should be approx 15.6mA and the voltage reading across the 1Ω resistor should be about 15.6mV.
But the Voltage reading was about 17mV which corresponds to 17mA. I am not sure if I am doing this right. Could somebody lead me in the right direction.
But the Voltage reading was about 17mV which corresponds to 17mA. I am not sure if I am doing this right. Could somebody lead me in the right direction.