SMPS Output Voltage drop When Load Connected to it

V

Venkateszr

New Member

• Nov 1, 2018

• #1

Newly designed 5v 1A smps output drop 200mA load connected to it. No load condition it show 5v. When load is connected drop to 3v.
How to fix it?
P1&P2_Input 240v AC
P3&P4_Primary Winding
P6&P5_Auxiliary winding
P7&P8_Secondary Winding
P9&P10_Filter capacitor 10uf,400v
P11&P12_Output 5v 1A
Switching IC is AP8012 Not VIPER 22A
Circuit Attached here

 

Attachments

• Schematic_SMPS-V2.0_Sheet-1_20181031180736.png

  74.1 KB · Views: 205

K

kubeek

Well-Known Member

Most Helpful Member

• Nov 1, 2018

• #2

That is really hard to say without knowing the parameters of your transformer.

 

V

Venkateszr

New Member

• Nov 1, 2018

• #3

Transformer taken from same type SMPS. 5V 1A

 

rjenkinsgb

Well-Known Member

Most Helpful Member

• Nov 1, 2018

• #4

The TL432 looks to be connected backwards?
It has anode to negative & cathode to positive, according to the diagram.

Edit - ignore that; it appears to use zener diode terminology so cathode is positive..

 

ronsimpson

Well-Known Member

Most Helpful Member

• Nov 1, 2018

• #5

Not on the schematic, but in the text, there is a 10uf cap P9-P10.
Are you certain the phase is right on all the windings of the transformer?
Do you have a oscilloscope?
It is hard to trouble shoot because it is not safe on the left half of the schematic.
I have a 0-400V 1.5A power supply, (current limited). P1-P2 that makes it safe to connect a oscilloscope.

 

V

Venkateszr

New Member

• Nov 7, 2018

• #6

Sorry i dont have oscilloscope .