eblc1388 Active Member Nov 20, 2008 #1 I have quite a few of these in my part drawer and also got their datasheet. However, it would be nice to have their SPICE model too so that I can test out new design in SwcadIII. I've searched on the net but couldn't locate any. Can anyone helps? Thanks. A typical jfet model is of the form: .MODEL 2N3370 NJF(VTO=-0.65 BETA=766.8E-6 BETATCE=-0.5 LAMBDA=9E-3 + RD=1 RS=1 CGS=2.916E-12 CGD=2.8E-12 PB=0.5 IS=114.5E-15 XTI=3 AF=1 + FC=0.5 N=1 NR=2 MFG=NSC) Last edited: Nov 20, 2008
I have quite a few of these in my part drawer and also got their datasheet. However, it would be nice to have their SPICE model too so that I can test out new design in SwcadIII. I've searched on the net but couldn't locate any. Can anyone helps? Thanks. A typical jfet model is of the form: .MODEL 2N3370 NJF(VTO=-0.65 BETA=766.8E-6 BETATCE=-0.5 LAMBDA=9E-3 + RD=1 RS=1 CGS=2.916E-12 CGD=2.8E-12 PB=0.5 IS=114.5E-15 XTI=3 AF=1 + FC=0.5 N=1 NR=2 MFG=NSC)
O on1aag New Member Nov 20, 2008 #2 Hi EBLC1388, Here's my jfet library, the 2N3820 is included, The 2SK49 is gonna be a japanese problem. on1aag. Attachments standard.jft.txt 23.1 KB · Views: 736
Hi EBLC1388, Here's my jfet library, the 2N3820 is included, The 2SK49 is gonna be a japanese problem. on1aag.
eblc1388 Active Member Nov 20, 2008 #3 That will do nicely. Perhaps someone else have got the 2SK49 model. Thanks to on1aag.
ericgibbs Well-Known Member Most Helpful Member Mar 10, 2010 #6 jari said: Can you send that model for me also? Click to expand... hi jari, The 2N3820 model is already in the LTS standard.jft folder as downloaded from Linear Tech. If you cannot see it, paste this into the standard.jft folder Code: .model J2N3820 PJF(Beta=1.271m Betatce=-.5 Rd=1 Rs=1 Lambda=40m Vto=-2.5 Vtotc=-2.5m Is=222.4f Isr=2.177p N=1 Nr=2 Xti=3 Alpha=29.8u Vk=400.1 Cgd=13.27p M=.4822 Pb=1 Fc=.5 Cgs=16.58p Kf=916.6E-18 Af=1 mfg=National) Last edited: Mar 10, 2010
jari said: Can you send that model for me also? Click to expand... hi jari, The 2N3820 model is already in the LTS standard.jft folder as downloaded from Linear Tech. If you cannot see it, paste this into the standard.jft folder Code: .model J2N3820 PJF(Beta=1.271m Betatce=-.5 Rd=1 Rs=1 Lambda=40m Vto=-2.5 Vtotc=-2.5m Is=222.4f Isr=2.177p N=1 Nr=2 Xti=3 Alpha=29.8u Vk=400.1 Cgd=13.27p M=.4822 Pb=1 Fc=.5 Cgs=16.58p Kf=916.6E-18 Af=1 mfg=National)
J jari New Member Mar 10, 2010 #7 Model Thank you. It seems to work in eldo simulation. I was developing some low noise preamplifier and need to find low noise P-channel JFET. ericgibbs said: hi jari, The 2N3820 model is already in the LTS standard.jft folder as downloaded from Linear Tech. If you cannot see it, paste this into the standard.jft folder Code: .model J2N3820 PJF(Beta=1.271m Betatce=-.5 Rd=1 Rs=1 Lambda=40m Vto=-2.5 Vtotc=-2.5m Is=222.4f Isr=2.177p N=1 Nr=2 Xti=3 Alpha=29.8u Vk=400.1 Cgd=13.27p M=.4822 Pb=1 Fc=.5 Cgs=16.58p Kf=916.6E-18 Af=1 mfg=National) Click to expand...
Model Thank you. It seems to work in eldo simulation. I was developing some low noise preamplifier and need to find low noise P-channel JFET. ericgibbs said: hi jari, The 2N3820 model is already in the LTS standard.jft folder as downloaded from Linear Tech. If you cannot see it, paste this into the standard.jft folder Code: .model J2N3820 PJF(Beta=1.271m Betatce=-.5 Rd=1 Rs=1 Lambda=40m Vto=-2.5 Vtotc=-2.5m Is=222.4f Isr=2.177p N=1 Nr=2 Xti=3 Alpha=29.8u Vk=400.1 Cgd=13.27p M=.4822 Pb=1 Fc=.5 Cgs=16.58p Kf=916.6E-18 Af=1 mfg=National) Click to expand...