Amplifier
Hi Sheila's wheels,glad to hear you've had some success.O.K.You can get
them on the strip board,with plenty of room,I've sent a suggestion,which you can modify if need be.you can space them out to suit your soldering skills,All jumpers to be on the top of the board,and "break" the rails where neccessary.As you will see it's 2 mono amps,giving 2 seperate channels.The two C6 Caps could be replaced by one 2200uF X35V,if you want,but you will
have to modify the jumpers.Any more help? let me know. Good luck Terry.