Struggling to find a right angle DC jack (1.3mm x 3.5mm male) that fits

TheJay · Feb 22, 2023

I realise that this is a very basic question to a lot of those on this forum and I am grateful for your time.

I ordered "1.3mm x 3.5mm Male Plug Right Angle L Jack DC Power Tip Connector"

The dimensions are correct for the tip. The body of the DC jack is far too big. I need something that's very similar to the dimensions of the moulded tip DC jack that came with the adapter I am using.

There appeared to be very limited choice when I was looking and found these in the first place.

Please tell me there's a way to get a jack that's a similar size to the original that I can add?

Thank you very much for your time.

TheJay · Apr 12, 2023

Right, it's time to start thinking about finishing this project. I've got my male and female PicoBlade crimps and plastic connectors.

What are the conventions for which way around the male and female parts should be oriented? Should the male part be on the plug side and the female part on the short DC jack end?

How do I crimp the female terminals using the tool?

TheJay · Apr 15, 2023

Ughhh, the wire gauge doesn't appear to be correct (the insulation is far too thick) and the crimps are not working. What's the easiest way to measure stranded wire gauge? The wires are far too many and small to count and measure.

Doug · Apr 17, 2023

you can buy pins with wires already crimped.
just splice,, use color heat shrink if u want colors.

https://www.molex.com/molex/products/family/precrimped_leads

doug

TheJay · Apr 18, 2023

Thanks Doug. I hate to admit it, I ended up soldering yesterday after losing my patience.

Doug · Apr 19, 2023

That is great..
The old days of plenty of local part suppliers and plenty of parts with cheap shipping prices are gone.

TheJay · Apr 19, 2023

It's really sad Maplins disappeared.

Nigel Goodwin · Apr 19, 2023

TheJay said:
It's really sad Maplins disappeared.

The decent days of Maplins went a VERY long time ago, back in the 'old days' they were a really good source of parts.

But even the crappy 'modern' Maplins was better than nothing, and well worth a nose round.

Struggling to find a right angle DC jack (1.3mm x 3.5mm male) that fits

TheJay

Member

TheJay

Member

TheJay

Member

Doug

Member

TheJay

Member

Doug

Member

TheJay

Member

Nigel Goodwin

Super Moderator

Similar threads

Struggling to find a right angle DC jack (1.3mm x 3.5mm male) that fits

Member

Member

Member

Member

Member

Member

Member

Super Moderator

Similar threads

Privacy & Transparency

Privacy & Transparency