Hello to All,
i have project i thought you may find usefull, it's a 600va isolation transofrmer with 220volt pri/sec voltages. i designed and built this from recycled psu parts..but the traffo itself is made out of fresh materials.
i can not post pictures at this time as the server hosting the pics is up for maintenance!
here is the transformer data:
core = EI 1 3/4 in CL stacked to a depth of 3incher( about 15lbs)
primary/secondary coils = 320turns each of #16 AWG single formex magnet wire, copper weight about 2kgs.
bobbin = plastic pre-formed bobin for the selected core!
i have project i thought you may find usefull, it's a 600va isolation transofrmer with 220volt pri/sec voltages. i designed and built this from recycled psu parts..but the traffo itself is made out of fresh materials.
i can not post pictures at this time as the server hosting the pics is up for maintenance!
here is the transformer data:
core = EI 1 3/4 in CL stacked to a depth of 3incher( about 15lbs)
primary/secondary coils = 320turns each of #16 AWG single formex magnet wire, copper weight about 2kgs.
bobbin = plastic pre-formed bobin for the selected core!