Tools

S

spec

Well-Known Member

Most Helpful Member

• May 29, 2016

• #1

How do you make comments about the 'Tools' thread. For example, in a quiz I suspect one of 'correct' answers is a typo.

spec

 

ericgibbs

Well-Known Member

Most Helpful Member

• May 29, 2016

• #2

hi spec,
Which quiz and question do have you in mind.?
I wrote and posted all the Tools and Quiz's, I no longer have access to the site Tools, so they have fallen into disrepair and never get upgraded.

Eric

 

S

spec

Well-Known Member

Most Helpful Member

• May 29, 2016

• #3

Hy Eric,

Quiz V7.0 Question 3
I suspect answer 1 is correct
but answer 3 is given as correct

spec

 

ericgibbs

Well-Known Member

Most Helpful Member

• May 29, 2016

• #4

hi,
This is a clip from Quiz 7, are you sure about which quiz /quest you are referring.
E

 

Attachments

• A01.gif

  5.1 KB · Views: 458

Ian Rogers

User Extraordinaire

Forum Supporter

Most Helpful Member

• May 29, 2016

• #5

Eric.... Question 4 about the 3db.... Ik resistor and a 1Khz signal equates to 0.159 not 0.136

Spec has looked at the score above thinking question 3...

 

S

spec

Well-Known Member

Most Helpful Member

• May 29, 2016

• #6

Sorry Eric,

Question 2, about the transformer

spec

Our posts crossed Ian

 

Ian Rogers

User Extraordinaire

Forum Supporter

Most Helpful Member

• May 29, 2016

• #7

Sorry.... The Q4 is correct anyway... So's Q3....

 

Ian Rogers

User Extraordinaire

Forum Supporter

Most Helpful Member

• May 29, 2016

• #8

I have never had the ability to edit the tools... Only Eric and EM had this ability.... If there are errors then Dave will have to bring Eric back to the fold...

 

ericgibbs

Well-Known Member

Most Helpful Member

• May 29, 2016

• #9

hi spec,
As you may have seen the Credits for Quiz #7 is to Mr Al.
PM him and ask him to read this Thread.

E

 

S

spec

Well-Known Member

Most Helpful Member

• May 29, 2016

• #10

I didn't really want to get into a technical discussion. My question was just about the method of feedback for the Tools topic. Ian has explained that currently there is no mechanism.

Thx for replies anyway.

spec