R raphaelmec06 New Member Jun 9, 2010 #1 Good night, I´m going to build this signal amplifier: https://www.electro-tech-online.com/custompdfs/2010/06/LB-1.pdf But I can not find the LM102 and LM107 op amps anywhere. Searching through the internet, I have found that this pieces are discontinued. What amps could I use to replace them??? Thanks in advance!
Good night, I´m going to build this signal amplifier: https://www.electro-tech-online.com/custompdfs/2010/06/LB-1.pdf But I can not find the LM102 and LM107 op amps anywhere. Searching through the internet, I have found that this pieces are discontinued. What amps could I use to replace them??? Thanks in advance!
ericgibbs Well-Known Member Most Helpful Member Jun 9, 2010 #2 raphaelmec06 said: Good night, I´m going to build this signal amplifier: https://www.electro-tech-online.com/custompdfs/2010/06/LB-1-1.pdf But I can not find the LM102 and LM107 op amps anywhere. Searching through the internet, I have found that this pieces are discontinued. What amps could I use to replace them??? Thanks in advance! Click to expand... hi, I would suggest either a AD620 or preferably an AD623 Those two IC's have all the components shown in that diagram contained within a 8 pin IC package. Try: Datasheet & Application Note Database, PDF, Circuits, Datasheets | Datasheet Archive Last edited: Jun 9, 2010
raphaelmec06 said: Good night, I´m going to build this signal amplifier: https://www.electro-tech-online.com/custompdfs/2010/06/LB-1-1.pdf But I can not find the LM102 and LM107 op amps anywhere. Searching through the internet, I have found that this pieces are discontinued. What amps could I use to replace them??? Thanks in advance! Click to expand... hi, I would suggest either a AD620 or preferably an AD623 Those two IC's have all the components shown in that diagram contained within a 8 pin IC package. Try: Datasheet & Application Note Database, PDF, Circuits, Datasheets | Datasheet Archive
E eliteph33r New Member Jun 10, 2010 #3 Yeah that was my next question do you need the CAN style, 8 pin or 14 pin chip?
T trader New Member Jun 23, 2010 #4 raphaelmec06 said: Good night, I´m going to build this signal amplifier: https://www.electro-tech-online.com/custompdfs/2010/06/LB-1-2.pdf But I can not find the LM102 and LM107 op amps anywhere. Searching through the internet, I have found that this pieces are discontinued. What amps could I use to replace them??? Thanks in advance! Click to expand... Depending on the application, you can use low cost Quad LM324 op-amp to configure as instrument amplifier. ________________________________________________________________________________ https://www.remote-controllers.info https://www.wzmicro.com
raphaelmec06 said: Good night, I´m going to build this signal amplifier: https://www.electro-tech-online.com/custompdfs/2010/06/LB-1-2.pdf But I can not find the LM102 and LM107 op amps anywhere. Searching through the internet, I have found that this pieces are discontinued. What amps could I use to replace them??? Thanks in advance! Click to expand... Depending on the application, you can use low cost Quad LM324 op-amp to configure as instrument amplifier. ________________________________________________________________________________ https://www.remote-controllers.info https://www.wzmicro.com