Hello to everyone.
I dismantled the central locking system and checked the circuit. There is a common +12v and then when you press the button to the right, it will LOCK and to the left it will UNLOCK. I observed the connector and +12v is put onto the wire and thus the system will lock, and +12v on the other side will unlock. Now this is where my brain has died.
If I put +12v directly onto the wire which shows +12v when you press the LOCK side of the switch, nothing happens. Also this happens when I do +12v onto the UNLOCK nothing happens. But upon pressing the button physically it will register +12v onto the said wires and work.
Now there are a few other wires in the connector block but printed on the circuit itself is the writing for which wire is un/Lock.
So I ask anyone who may have an incling to help me out here. I would appreciate it.
Thank you
The Brit