Hi everybody,
Just try it out in my circuit and it WORK nicely.
Yes Roff, just now i was facing the problem that the MOSFET will not turn OFF by itself when the gate voltage is remove and have to connect gate to ground then MOSFET will OFF. Actually, i plan to use a decade counter like 4017 to control the ON/OFF of the MOSFET, when a button connected to the clock pin of the 4017 is pressed(give a clock pulse) then the IC will count 1 and pin that represent "1" is connect to the gate of the MOSFET and thus turn ON the MOSFET, when the button is press again the counter will jump to "2" and pin represent "2" will connect to reset pin of counter IC then will reset the counter to "0".
But just dont know this will able to turn the MOSFET OFF or not when the counter's output is not "1".
Anybody have any opinion?
Thanks a lot