Yes I know how to control voltage, but thanks.
But, if there is no current control, how this PSU make control to working properly in parralel with second PSU???
On "Current Share" pin I have voltage that is higher if the load is higher, eg. 0A load=300mV on CS pin, 10A load=1,1V on CS pin, 72A load= 7,9V on CS pin etc.
And one PSU is setting to "master" and second to "slave", both CS pins are connected together, then slave PSU looking to master CS pin(CS voltage) and changing impedance(I read this on SMPS handbook) or something like this to have the same load like in master PSU.
Because we can't change load resistance, or output voltage for this, and amperage must be like in master PSU.
I'm not sure but changing impedance is on AC circuits only, not in DC....
So how these PSU's limiting output ameprage???
I know that here on this forum must be few "gods of SMPS's" so PLEASE HELP ME!