Hi guy,
I am doing a project at my home lab and i need to used thermocouple with my PLC which can accept input type of 0~10 v , 4~20 ma and 0~5 v. So please guide me how can I proceed.
You will need to a "thermocouple amplifier" between the TC and the PLC. This can be done with garden variety op amps, dedicated TC IC's, or industrial interface modules. It depends a lot on cost vs. your expertise.
Google: thermocouple amplifier
to get an idea of your options.
Hi guy,
I am doing a project at my home lab and i need to used thermocouple with my PLC which can accept input type of 0~10 v , 4~20 ma and 0~5 v. So please guide me how can I proceed.