venkatkumar.muneeswaran
New Member
I have igbt and diode data sheet used for inverter and rectifier circuit design.
i need simulate inverter in ltspice using the voltage controlled switch component.
How obtain to these values from the igbt/diode data sheet
datasheet is attached here
could anyone please help it?
i need simulate inverter in ltspice using the voltage controlled switch component.
How obtain to these values from the igbt/diode data sheet
datasheet is attached here
| Name | Description | Units |
| Ron | Resistance in forward conduction | W |
| Roff | Resistance when off | W |
| Vfwd | Forward threshold voltage to enter conduction | V |
| Vrev | Reverse breakdown voltage | V |
| Rrev | Breakdown impedance | W |
| Ilimit | Forward current limit | A |
| Revilimit | Reverse current limit | A |
| Epsilon | Width of quadratic region | V |
| Revepsilon | Width of reverse quad. region | V |
Is | saturation current | A |
| Rs | Ohmic resistance | W |
| N | Emission coefficient | - |
| Tt | Transit-time | sec |
| Cjo | Zero-bias junction cap. | F |
| Vj | Junction potential | V |
| M | Grading coefficient | - |
| Eg | Activation energy | eV |
| Xti | Sat.-current temp. exp | - |
| Kf | Flicker noise coeff. | - |
| Af | Flicker noise exponent | 1 |
| Fc | Coeff. for forward-bias depletion capacitance formula | - |
| BV | Reverse breakdown voltage | V |
| Ibv | Current at breakdown voltage | A |
| Tnom | Parameter measurement temp. | ºC |
| Isr | Recombination current parameter | A |
| Nr | Isr emission coeff. | - |
| Ikf | High-injection knee current | A |
| Tikf | Linear Ikf temp coeff. | /ºC |
| Trs1 | linear Rs temp coeff. | /ºC |
| Trs2 | Quadratic Rs temp coeff. | /ºC/ºC |
could anyone please help it?