Voltage controller

Status
Not open for further replies.
M

Mahadev

New Member
I need a circuit of the op-based oscillator to blink LED. But in the input, from 12V supply, when the input is above 9V, the oscillator should be in ON condition and an LED is to blink. And when the input is below 9V, the oscillator immediately gets a turn-off and LED should turn off its blinking. please help if you know. Need to build the circuit in LTSPICE.
 
Sort by date Sort by votes
Clue : Use a LM555 timer, astable mode, as LED blinker, and a comparator to
disable the LM555 when V falls below 9V.

Regards, Dana.
 
Upvote 0 Downvote
Mahadev said:
Tried but failed to get the correct output. if you know the circuit, share it.
thank you.
Click to expand...
You're rather missing the point - school work is to see what YOU know - if you're learning nothing and getting other people to do the work for you, then that's simply cheating, and doing you no good whatsoever.

'If' you have indeed tried, then post the circuit along with your observations, and members may be prepared to offer critique and advice.
 
Upvote 0 Downvote
Me and my team is preparing a project for our academics. and this is not completely a school work. we are done with the op based oscillator to blink the LED. we are unable to set the voltage threshold.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
HELP.... the scheme and operation of the AC voltage regulator with pulse-width control on the active load. + time charts ))
Replies
17
Views
22K
danadak
D
Unipolar transistor - calculate current Id, voltages Ugs and Uds
Replies
3
Views
18K
rjenkinsgb
G
proteus 741 op amp current to voltage help
2
Replies
38
Views
13K
audioguru
D
Kirchoff's current/voltage laws, superposition and thevinens
Replies
3
Views
3K
Dankenstien10
D
C
Field oriented control (FOC) project with Simulink
Replies
0
Views
2K
Cadena
C
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…