Does it have to be TO-92? If your more flexible on that requirement you will have better luck finding a similar part that is adjustable. For example:
https://www.mouser.com/ds/2/268/22070a-53890.pdf
The MCP1824/MCP1824S is a 300 mA Low Dropout
(LDO) linear regulator that provides high current and
low output voltages.
The MCP1824 comes in a fixed or
adjustable output voltage version, with an output
voltage range of 0.8V to 5.0V. The 300 mA output
current capability, combined with the low output voltage
capability, make the MCP1824 a good choice for new
sub-1.8V output voltage LDO applications that have
high current demands. The MCP1824S is a 3-pin fixed
voltage version.
Also take a look at this selection Matrix:
https://www.mouser.com/Microchip/Se...tors/_/N-5cgacZscv7?P=1z0zl2wZ1z0si72&FS=True
I'm afraid if you stick with your TO-92 requirement, your gonna limit your choices. Party on